1. Choose embroidery for decoration. The fabric on which the work is done must be equal to the size of the frame or be larger than it.
2. Lay piece C over the embroidery so that it fits seamlessly into the frame window. With a simple pencil, circle detail C along the outer contour.
3. Trim the edges of the embroidery along the resulting line.
4. Place part B in the center of part A. Place the embroidery on top of both parts and make sure that the edges of the work do not extend beyond the edges of part A.
5. Then place part C on the embroidery, pressing firmly, so that part B is located in the window of part C. Make sure that the holes of parts A and C are correctly positioned, they must match.
6. Fix the frame parts with clips - one on each side. Place pieces of soft cloth between the clamp and the frame to prevent damage to the frame.
7. Sew parts A and C through the holes. Colors, thread thickness and stitch type are determined by yourself, depending on your design idea. The thread can be fastened from the back side of part A in one of the holes.
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
The kit includes: black plastic canvas 14 count, PNK Kirov floss threads in 22 colors, sorted on an organizer, needle, diagram and embroidery guide.
Both sides of the locomotive are stitched according to the pattern, then cut out along the...
Organiser for beads made of plywood with transparent acrylic cover. A magnetic holder is embedded in the organiser, which can be used as a holder for needles.
error Your review appreciation cannot be sent